Dimensions
- Area: 0.78 m² m
- Length: 130 cm cm
- Width: 60 cm cm
- Area: 1.30 m² m
- Width: 100 cm cm
Product Details
- Suitable for rooftop windows, tilt windows and turn windows.
- Can be cut to the desired width.
- The blind can be cut and re-cut to fit a smaller window. Ensure that you do not exceed maximum cut length.
- The blind is cordless for increased child safety.
- Drill-free mounting using the 4 included brackets with adhesive tape. The adhesive has been tested and approved for smooth glass surfaces.
- The assembly instructions include a table with numbers corresponding to those on the fabric and rails to facilitate precise measuring and cutting.
- The rails at the top and bottom allow you to mount the pleated blind precisely, covering any gap.
- Easy to maneuver using either of the plastic handles at the top or bottom.
- Depending on your needs, you can pull the blind from the top down or from the bottom up. You can also adjust the blind so it only covers a section in the middle.
- The block-out fabric effectively blocks out light and completely darkens your room, helping to set the perfect ambience for a movie night or to secure a good night’s sleep.
- Please refer to packaging label for country of origin
Good to know
- Highly recommended to attach to surfaces made of glass.
- For window frames or surfaces not recommended for the adhesive, mount the brackets with screws using a drill or screwdriver. The brackets are prepared with small holes for this purpose.
- To reposition or reuse on another window, remove adhesive-mounted brackets with plastic hand scraper. Replace with new brackets available cost-free at IKEA stores or contact IKEA Customer Services for help.
- For door windows or windows taller than 130 cm, mount 2 pleated blinds to cover the whole surface.
- Suitable for rooftop windows, tilt windows and turn windows.
- The top rail of the 60 cm wide blind can be cut max. 40 cm.
- If you need to adapt the dimensions of the pleated blind to your window, cut the top/bottom rails and the rods with a metal saw. Cut the fabric with a safety knife.
- The included tool makes it easier to get straight, accurate lines when adapting the size of your rail/rod/fabric. It also protects your fingers.
- For a smooth, friction-free glide, apply a few drops of silicone spray lubricant to the lock mechanism in the brackets. Ensure the spray is suitable for plastic and metal.
- Can also be used in bathrooms.
- The top rail of the 100 cm wide blind can be cut max. 40 cm.
Designer
Henrik PreutzCare instructions
- Do not wash.
- Do not bleach.
- Do not tumble dry.
- Do not iron.
- Do not dryclean.
- Wipe clean with a dry cloth.
Environment & Materials
- Fabric: 100 % polyester (100% recycled), 100 % Polyethylene plastic
- Top rail/ Bottom rail: Aluminium, Powder coating
- Rod: Stainless steel, Powder coating
- Lock mechanism: Polyamide plastic, ABS plastic, Reinforced polyamide plastic
- Handle: ABS plastic
- Tool: Polypropylene plastic