A bit screwdriver is required to assemble this chair, sold separately as a part of TRIXIG 15-piece toolset.
Dimensions
- Table length: 230 cm (7 ft 7 in)
- Table width: 90 cm (2 ft 11 in)
- Table height: 75 cm (2 ft 6 in)
- Chair width: 56 cm (1 ft 10 in)
- Chair depth: 50 cm (1 ft 8 in)
- Chair height: 74 cm (2 ft 5 in)
- Chair width: 51 cm (1 ft 8 in)
- Chair depth: 48 cm (1 ft 7 in)
- Chair height: 78 cm (2 ft 7 in)
- Chair width: 47 cm (1 ft 7 in)
- Chair depth: 47 cm (1 ft 7 in)
- Chair height: 80 cm (2 ft 7 in)
Product Details
- High-quality oak veneer table with clear acrylic lacquer finish ensures durability and a refined, natural aesthetic, combining functionality with beauty.
- The seat is made of handwoven paper cord, a naturally cool, comfortable and resistant material, used for years in furniture making.
- Please refer to packaging label for country of origin
Good to know
- This table has been tested for general, non-domestic use and meets the requirements for safety, durability and stability set forth in the following standard: EN 15372 and ANSI/BIFMA X:5.5.
- This seating furniture is tested and complies with relevant strength and durability standards. The tests simulate typical usage of the product and are based on use by persons weighing up to 110 kg.
- This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1.
- Only recommended for indoor use.
- Paper cord is a naturally resistant material that can last for many years. The seat is available as a spare part and can be replaced if needed.
- A bit screwdriver is required to assemble this chair, sold separately as a part of TRIXIG 15-piece toolset.
- To prevent surface scratches, complete with TRIXIG stick-on floor protectors, sold separately.
- This seating furniture has been tested for public use and meets the requirements for safety, durability and stability set forth in the following standards: EN 16139-Level 1 and ANSI/BIFMA x5.4.
Care instructions
- Wipe clean with a cloth dampened in a mild cleaner.
- Wipe dry with a clean cloth.
- Protect from direct sunlight to prevent drying-out.
- For increased stability, re-tighten the screws about two weeks after assembly and when necessary.
- If placed close to a radiator or other source of heat, the material can dry out and deteriorate.
- Rattan is happiest in dry, cool environments with an even temperature.
Environment & Materials
- Particleboard, Layer-glued wood veneer, Honeycomb structure paper filling (100% recycled), Oak veneer, Oak veneer, Clear acrylic lacquer, Oak veneer, Clear acrylic lacquer, Fibreboard, Oak veneer, Clear acrylic lacquer
- Solid wood, Oak veneer, Clear acrylic lacquer
- Side frame/ Cross rail: Solid beech, Adhesive, Stain, Tinted clear lacquer
- Seat: Steel, Paper, Epoxy/polyester powder coating, Clear lacquer
- Backrest: Layer-glued wood veneer, Beech veneer, Stain, Tinted clear lacquer
- Leather: Through dyed full grain leather from cattle
- Smoulder resistant lining: Polyester wadding
- Frame: Solid oak, Adhesive, Clear acrylic lacquer
- Backrest: Layer-glued wood veneer, Oak veneer, Clear acrylic lacquer
- Seat: Fibreboard
- Bracket: Layer-glued wood veneer, Tinted clear lacquer
- Comfort material: Polyurethane foam 35 kg/cu.m.
- Backing: 100% polypropylene
- Stitching thread: 100 % polyester
- Backrest: Rattan, Tinted clear lacquer
- Seat: Layer-glued wood veneer, Clear lacquer
- Comfort material: Polyurethane foam 35 kg/cu.m., Polyester wadding
- Frame: Solid oak, Adhesive, Stain, Tinted clear acrylic lacquer
- Backrest: Layer-glued wood veneer, Oak veneer, Stain, Tinted clear acrylic lacquer
- Bracket: Layer-glued wood veneer, Stain, Tinted clear lacquer